Aeration (Servio AIR)
- Fine-bubble aeration
- For air temperatures up to 100⁰C
- High operational reliability thanks to intergrated NRV
- Cost-efficient control range from 1.0 up to 8.0 Nm3/h
- Simple diaphragm replacement after long periods of use
- Simple assembly without gluing and welding
- Robust construction through the use of glass fibre reinforced plastic
Drainage (Borehole)
- High-performance, efficient impeller and diffuser designs with high quality machining result in superior performance
- High quality material and construction provides corrosion resistance and long service life.
Drainage (Bottom Intake)
- Submersible multi-stage pump
- Deep water lowering
- Self-cooling design
- Rewindable motors
- Wear-resistant design due to different material versions
- Ceramic CT coating possible to increase effectiveness
- Easy installation on the ascending pipe
- Very low draw depth
Drainage / Sewage Pumps (FA)
- Cast Iron Construction
- Special coatings available to protect against corrosive & abrasive liquids
- DN50 up to DN500 available
- Explosion proof motors available
- Stationary, portable and horizontal installation available
- Wet & Dry installation available
- Free ball passage : 45mm – 130mm
- Easy Installation due to suspension unit or pump base
Drainage / Seweage Pumps (Rexa Pro)
- Cast Iron Construction
- Special coatings available to protect against corrosive & abrasive liquids
- DN50 up to DN80 available
- Stationary installation only
- Wet installation only
- Robust
- Easy Installation due to suspension unit or pump base
Drainage Pumps (TM/TMW)
- Ready to plug
- Motor monitoring via temperature
- Sheath current cooling
- Connection cable
- Float switch
- Non-return valve enclosed (depending on type)
- TMW with turbulator for a constantly clean pump
- Easy installation
Drainage/ Sewage Pumps (JKS/JDS/JDSK/JSB)
- Vortex & Cutter impeller available
- Cast iron & 316 S/Steel construction available
- Built – in motor protection as standard
- Connection cable
- Float switch – 230V only
- Can handle solids up to 50mm
- Cost effective
- Easy installation
End – Suction Norm Pumps (NL)
- Cast iron pump
- Stainless steel shaft
- Cast iron & Bronze impeller available
- Mechanical seal
- Models from 32-125 up to 150-400 – Locally Available
- Models from 150 – 500 up to 300-400 – Special Request
- Flows up to 1500m3 / hour
- Head up to 145m at 2900 rpm
High flow – Split-case pump (SCP)
- 1 or 2 stage, low pressure centrifugal pump in monobloc design
- Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics
- Bronze/Stainless Steel impeller available
High flow – Split-case pump (Vertical Turbine)
- With immersed axial or semi-axial, single or multistage hydraulics
- As removable or permanent installation
- With open shaft for bearing lubrication with the fluid or with shaft trim for separate bearing lubrication
- Drive options: electric motor, diesel motor or steam turbine
Lift Pumps (Drainlift)
- Sewage lift pumps
- Suitable for residential and commercial buildings
- Easy Installation
- Suitable for permanent operation
- Built in NRV
- Reliable level measurement due to level sensor
Mixing (Servio ACT)
- Maximum energy efficiency with optimised mixing result
- IE3 motors available
- Optimised system performance through an increased penetration of biomass particles
- Low space requirement due to compact design
- Flow rate up to 4000m3/h
- Percent by volume of biomass particles: 40 up to 70%
- Layer thickness of biomass particles: 1.6 up to 5.5m
Sewage Pump (MTS)
- Stationary
- Wet installation only
- Flow rate from 2m3/h up to 14m3/h
- Internal Macerator
- Thermal motor monitoring
- 10m lead out cable as standard
- Ex – rated in accordance with ATEX as standard
Solid Separation (EMUport)
- Compact sewage pumping station
- Pumps do not come in contact with the solids in the wastewater
- Two Dry-well installed submersible sewage pumps for alternating mode
- Level measurement according to customers request
Transfer (Axial Flow)
- Submersible
- Special coatings available to protect against corrosive & abbrasive liquids
- Free ball passage: 85mm – 130mm
- Angle of blades can be adjusted by hand
- All filling fluids are environmentally safe
- ATEX versions available
Treatment (MIXER)
- Extremely low power consumption due to IE3 motor
- Light weight
- ATEX versions available
- Self-cleaning propeller
- Propeller in steel or PUR version
- Blades can be replaced individually – selected models
- 2 – 3 blade propellers
- Flexible installation
- Special coatings available to protect against corrosive & abrasive liquids

Water Management