10kg CO2 Trolley Units (Carbon Steel)

The 10kg CO2 trolley units are uniquely suited to hold CO2 fire extinguishers. It provides the user with effective mobile firefighting alternatives since it can be moved around easily.

2×9 Twin Fire Cabinet

2×9 Twin cabinets are manufactured using only SABS approved polyester resin and materials. Our range is benchmarked at the top of static asset protection and fire protection solutions. Safety equipment in fire fighting is of the utmost importance to us, and our fire cabinets are in high demand right across Africa.

20kg CO2 Tolley Units (Carbon Steel)

20kg CO2 Tolley Units make provision for those fire risks where hand-held extinguishers would be inadequate and a fixed engineered system would not be justified.

25kg DCP Trolley

The 25kg DCP Trolley unit can reach 7m when fighting a fire where access is limited and designed to securely store DCP fire extinguishers. Epoxy powder coating paint prevents corrosion on the fire extinguishers trolleys.

50kg DCP Trolley

This 50kg DCP trolley can reach up to 9m when fighting a fire where access is limited.

6L Wet Chemical Fire Extinguisher

Specially formulated wet chemical to suppress Class F fires, this 6L Wet Chemical Fire Extinguisher is designed to combat fires resulting from fats and edible oils burning in deep fryers.

9kg Truck Fire Cabinet

A new truck cabinet tailor-made for the transport industry that are manufactured using only SABS approved polyester resin and materials.

9L Foam Fire Extinguisher

The 9L Foam Fire Extinguisher is a stored pressure foam content extinguisher and is ideal for multi-risk situation where both Class A combustible materials and Class B, flammable liquid and gases, are likely to be found, or where Class B risks represent a direct hazard.

9L Water Fire Extinguishers

The 9L Water Fire Extinguishers are suitable for class A fires caused by the combustion of solid materials, mainly of organic origin, such as: wood, paper, straw, textiles, coal etc. Not for use on electrical equipment or electrical fires.

Aeration (Servio AIR)

Fine-bubble aeration
For air temperatures up to 100⁰C
High operational reliability thanks to intergrated NRV
Cost-efficient control range from 1.0 up to 8.0 Nm3/h
Simple diaphragm replacement after long periods of use
Simple assembly without gluing and welding
Robust construction through the use of glass fibre reinforced plastic

Alloy Steel CO2 2kg Fire Extinguisher

This Alloy Steel CO2 2kg Fire Extinguisher is specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires. Our top quality SANS 1567 certified carbon dioxide fire extinguishers are cased in steel or aluminium, and are purposefully designed to be user-friendly.

Alloy Steel CO2 5kg Fire Extinguisher

The Alloy Steel CO2 5kg Fire Extinguisher is specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires. Our top quality SANS 1567 certified carbon dioxide fire extinguishers are cased in steel or aluminium, and are purposefully designed to be user-friendly.

Aluminium Alloy CO2 2kg Fire Extinguisher

The Aluminium Alloy CO2 2kg Fire Extinguisher is CE0036 TUV approved. These extinguishers are specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires.

Aluminium Alloy CO2 5kg Fire Extinguisher

The Aluminium Alloy CO2 5kg Fire Extinguisher is CE0036 TUV approved. These extinguishers are specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires.

An overview of CO2 Trolley Units

CO2 trolleys units are uniquely suited to hold CO2 fire extinguishers. It provides the user with effective mobile firefighting alternatives since it can be moved around easily.

An overview of Fire Suppression Systems

Our fire suppression systems are safe and reliable, we provide a wide range of fire suppression products such as vehicle fire suppression systems, CO2 fire suppression and other.

An overview on AWG Firefighting Equipment

The AWG firefighting equipment is very specialised and is Europe’s leading manufacturer of professional firefighting fittings and firefighting equipment, founded more than 100 years ago. AWG provides end-to-end solutions for mobile and stationary fire prevention systems. Their standard of quality excellence is consistent with every order.

An overview on Fire Extinguishers

We provide a comprehensive range of high quality SABS 1910, SABS 1322 and SABS 1567 certified fire extinguishers to suit all marine, industrial, automotive and household requirements. Our selection of fire extinguishers are constructed to provide easy safe maintenance to SABS 1475 specifications by qualified SAQCC technicians.

An Overview on Safety Fire Cabinets

Arrow Sign

The Arrow sign is to show the location of firefighting equipment in a building or factory.

AWG Monitors

It is simple to handle, can be carried easily by a single person and takes just moments to set up, you will be ready for operations faster than ever before.

AWG Nozzles (Branch Pipes)

The AWG firefighting equipment is very specialised and is Europe’s leading manufacturer of professional firefighting fittings and firefighting equipment, founded more than 100 years ago. AWG provides end-to-end solutions for mobile and stationary fire prevention systems. Their standard of quality excellence is consistent with every order.

MCS Fire offers a full product line of AWG fittings – products you can rely on to keep you safe while you do your job saving other people’s lives!

Backing Boards

These wooden backing boards are used for to attach fire extinguisher with mounting against the wall.

Basket Strainers

Basket Strainers are devices attached to the end of a suction hose that prevents debris from entering the hose or the pump when drawing water from a pond or any other body of water.

Booster Connector

The Booster Connector is a high quality product manufactured entirely from intrinsically corrosion.

Branch Pipes Value Range

Connects with STD BS336 Instantaneous Connector.

Breather Hindge Door Cabinet

The Breather hinge door cabinets are manufactured using only SABS approved polyester resin and materials.

Carbon Steel CO2 2kg Fire Extinguisher

The Carbon Steel CO2 2kg Fire Extinguisher is specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires.

Carbon Steel CO2 5kg Fire Extinguisher

The Carbon Steel CO2 5kg Fire Extinguisher is specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires.

CNC Machine Suppression System

CNC Machine Suppression System is complete pre-engineered system kit for CNC machines and other high-risk mechanical equipment.

Cobra Fire Hose

The Cobra Fire Hose is a non-percolating hose with a robust, all-synthetic jacket. It is ideal for situations where water damage must be avoided, or where foam-making equipment is in use with excellent benefits and cost saving features.

Commercial Kitchen Suppression System

Commercial Kitchen Suppression System is a complete pre-engineered system for Commercial Kitchens and other areas at risk for grease-based fires.

D10

Industrial Sliding Gate Motor

So much thought has been put into every aspect of the D10 industrial sliding gate motor that we’ll have to wait for technology to catch up before we can make any improvements! The CENTURION D10 uses a battery-driven high-torque 24V DC motor, coupled to a robust gearbox to provide an access automation system that is quick, powerful and battery backed up – perfect for industrial and commercial applications where heavy gates are installed.

Easy to set up and easy on the eye, the CENTURION D10 has everything you’d expect from CENTURION. Add an LCD controller that can monitor diagnostics and set any function at the touch of a button and you’ll understand why you won’t need another gate motor for a long time.

D2 TURBO

Domestic Sliding Gate Motor

Prepare for your sliding gate to be turbocharged. A 12V DC battery revs the CENTURION D2 Turbo domestic sliding gate motor up to 9000rpm so it’ll move gates weighing up to 250 kilograms at up to 24 metres per minute. Now that’s fast! Sleek, strong, stylish – and even eco-conscious – this CENTURION has it all.

D5-EVO

Domestic & Light-Industrial Sliding Gate Motor

The evolution of the tried and tested D5-Evo 500kg gate motor for domestic and light-industrial applications. Incorporating battery backup you can bank on, potent push force and an intelligent LCD controller for easy setup, not to mention a plethora of features all tailor-made for the ultimate in security and convenience, the CENTURION D5-Evo is the apex predator of gate motors – it simply has no competition and no equal.

Davey Single Impeller Skid Unit

The Davey Single Impeller Skid Unit is a high quality single impeller skid unit and includes a 30m delivery hose and a 5m suction hose assembly, complete with quick coupling on suction.

Davey Twin Impeller Skid Unit

The Davey Twin Impeller Skid Unit includes a 60m delivery hose and a 5m suction hose assembly that is ideal for high volume application.

DCP 0.6kg Fire Extinguisher (Firemate)

The DCP 0.6kg Fire Extinguisher (Firemate) is the smallest extinguisher in this range and suitable for Class A, B or C fires, or a combination of these types.

DCP 1.0kg Fire Extinguisher (Firemate)

The DCP 1.0kg Fire Extinguisher (Firemate) is suitable for Class A, B or C fires, or a combination of these types.

DCP 1.0kg Fire Extinguishers (Blue Crane)

The DCP 1.0kg Fire Extinguishers is the smallest extinguisher in the Blue Crane range and suitable for Class A, B or C fires, or a combination of these types. All extinguishers supplied conform to the minimum fire ratings as specified in SANS 1910:2009

DCP 1.0kg STP Fire Extinguisher (Safequip)

The DCP 1.0kg STP Fire Extinguisher is SABS 1910 approved and suitable for Class A, B or C fires, or a combination of these type of fires. Dry Chemical Portable fire extinguishers are the most widely used of all types of fire extinguishers.

DCP 1.5kg Fire Extinguisher (Blue Crane)

This Blue Crane DCP 1.5kg Fire Extinguisher is suitable for Class A, B or C fires, or a combination of these types. All extinguishers supplied conform to the minimum fire ratings as specified in SANS 1910:2009

DCP 1.5kg Fire Extinguisher (Firemate)

The DCP 1.5kg Fire Extinguisher (Firemate) is the ideal extinguisher for the motor racing industry, suitable for Class A, B or C fires

DCP 1.5kg STP Fire Extinguisher (Safequip)

The DCP 1.5kg STP Fire Extinguisher is SABS 1910 approved and suitable for Class A, B or C fires, or a combination of these type of fires. Dry Chemical Portable fire extinguishers are the most widely used of all types of fire extinguishers.

DCP 2.5kg Fire Extinguisher (Firemate)

The DCP 2.5kg Fire Extinguisher (Firemate) is highly effective for electrical hazards as it interferes with the combustion process and provides rapid fire knock down.

DCP 2.5kg Fire Extinguishers (Blue Crane)

The DCP 2.5kg Fire Extinguishers (Blue Crane) is an ideal extinguisher for the building industry and suitable for Class A, B or C fires, or a combination of these types. All extinguishers supplied conform to the minimum fire ratings as specified in SANS 1910:2009.

DCP 2.5kg STP Fire Extinguisher (Safequip)

The DCP 2.5kg STP Fire Extinguisher is SABS 1910 approved and suitable for Class A, B or C fires, or a combination of these type of fires. Dry Chemical Portable fire extinguishers are the most widely used of all types of fire extinguishers.

DCP 4.5kg Fire Extinguisher (Firemate)

The DCP 4.5kg Fire Extinguisher (Firemate) is fitted with a high pressure discharge hose and discharge nozzle which locates onto a L-shape nozzle holder fixed to the foot ring of the extinguisher. Suitable for Class A, B or C fires, or a combination of these types.

DCP 4.5kg Fire Extinguishers (Blue Crane)

DCP 4.5kg Fire Extinguishers and bigger are fitted with a high pressure discharge hose and discharge nozzle which locates onto a L-shape nozzle holder fixed to the foot ring of the extinguisher.

DCP 4.5kg STP Fire Extinguisher (Safequip)

The DCP 4.5kg STP Fire Extinguisher is SABS 1910 approved and suitable for Class A, B or C fires, or a combination of these type of fires. Dry Chemical Portable fire extinguishers are the most widely used of all types of fire extinguishers.

DCP 9.0kg Fire Extinguisher (Blue Crane)

The DCP 9.0kg Fire Extinguisher is the largest extinguisher in the Blue Crane range and suitable for Class A, B or C fires, or a combination of these types. All extinguishers supplied conform to the minimum fire ratings as specified in SANS 1910:2009

DCP 9.0kg Fire Extinguisher (Firemate)

The DCP 9.0kg Fire Extinguisher (Firemate) is fitted with a high pressure discharge hose and discharge nozzle which locates onto a L-shape nozzle holder fixed to the foot ring of the extinguisher. Suitable for Class A, B or C fires, or a combination of these types.

DCP 9.0kg STP Fire Extinguisher (Safequip)

The DCP 9.0kg STP Fire Extinguisher is SABS 1910 approved and suitable for Class A, B or C fires, or a combination of these type of fires. Dry Chemical Portable fire extinguishers are the most widely used of all types of fire extinguishers.

Dividers And Collectors

Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve.

Double Door Hose Reel Cabinet (Closed Back)

This doule door hose reel cabinet has a closed back standing 800mm high and 800mm wide, manufactured using only SABS approved polyester resin and materials.

Double Door Hose Reel Cabinet (Open Back)

This doule door hose reel cabinet has a open back standing 800mm high and 800mm wide, manufactured using only SABS approved polyester resin and materials.

Drainage (Borehole)

High-performance, efficient impeller and diffuser designs with high quality machining result in superior performance
High quality material and construction provides corrosion resistance and long service life.

Drainage (Bottom Intake)

Submersible multi-stage pump
Deep water lowering
Self-cooling design
Rewindable motors
Wear-resistant design due to different material versions
Ceramic CT coating possible to increase effectiveness
Easy installation on the ascending pipe
Very low draw depth

Drainage / Sewage Pumps (FA)

Cast Iron Construction
Special coatings available to protect against corrosive & abrasive liquids
DN50 up to DN500 available
Explosion proof motors available
Stationary, portable and horizontal installation available
Wet & Dry installation available
Free ball passage : 45mm – 130mm
Easy Installation due to suspension unit or pump base

Drainage / Seweage Pumps (Rexa Pro)

Cast Iron Construction
Special coatings available to protect against corrosive & abrasive liquids
DN50 up to DN80 available
Stationary installation only
Wet installation only
Robust
Easy Installation due to suspension unit or pump base

Drainage Pumps (TM/TMW)

Ready to plug
Motor monitoring via temperature
Sheath current cooling
Connection cable
Float switch
Non-return valve enclosed (depending on type)
TMW with turbulator for a constantly clean pump
Easy installation

Drainage/ Sewage Pumps (JKS/JDS/JDSK/JSB)

Vortex & Cutter impeller available
Cast iron & 316 S/Steel construction available
Built – in motor protection as standard
Connection cable
Float switch – 230V only
Can handle solids up to 50mm
Cost effective
Easy installation

Drip Torch

Used for wildfire suppression and other forestry applications when controlled burning is done to create fire breaks. The Driptorch is used to intentionally ignite fires.

Duraflex Progress Hose

The Duraflex Progress Hose is the number one hose for firefighters worldwide, proven to be tough, durable, and resistant against abrasion, oil, fuel and a wide range of chemicals.

Electrical Cabinet Suppression System

The Electrical Cabinet Suppression System is a complete pre-engineered system for electrical cabinets and other enclosed areas with high-risk electric circuitry.

Embersafe Fire Extinguisher

The new Embersafe fire extinguisher is an innovative water type fire extinguisher that is worn as a backpack and filled being worn, which eliminates the awkward requirement of trying to fit a weighted object to your back.

Embersafe Fire Extinguisher

The new Embersafe Fire Extinguisher is an innovative water type fire extinguisher that is worn as a backpack and filled being worn, which eliminates the awkward requirement of trying to fit a weighted object to your back.

End – Suction Norm Pumps (NL)

Cast iron pump
Stainless steel shaft
Cast iron & Bronze impeller available
Mechanical seal
Models from 32-125 up to 150-400 – Locally Available
Models from 150 – 500 up to 300-400 – Special Request
Flows up to 1500m3 / hour
Head up to 145m at 2900 rpm

Exit Sign

This exit sign is designed to be well lit, to direct occupants to safety in the event of a fire emergency.

Fire Axes

There are two main types of fire axes used in firefighting. The one is a flathead axe, which just has a wedge for cutting into objects. The other type is a pick head axe which has a cutting wedge on one side, and a pointed pick for penetration of objects.

Fire Beater

The Fire Beater has a solid hardwood handle with industrial grade rubber beater for effective knockdown of bush fires.

Fire Blanket

The Fire blanket is compact, easy to install, should be accessible but not too close to the risk and its instructions should be read and understood before the need to use, it has excellent insulation properties.

Fire Extinguisher Sign

The Fire Extinguisher Sign indicates the location of a fire extinguisher in the event of a fire.

Fire Hose Reel Accessories

We offers a wide range of fire hose reel accessories that are designed for industrial applications such as valves, hand-wheels, spacers, nozzles, nuts and bolts. MCS is a leading supplier of fire hose reels for commercial, industrial and public buildings for response to a small developing fire.

Fire Hydrant Valve

A Fire Hydrant Valve is a pipe fitting that help to regulate, direct or control the flow of fire suppressing agents by opening, closing or partially obstructing passageways in the hose connectors. Non-return valves stop the fire suppressing agent from flowing in the wrong direction.

Fire Sand Bucket

A fire sand bucket or fire bucket is used to extinguish fires by filling it with sand, and throwing the sand over the fire. Typically, fire buckets are painted bright red, with the word “Fire” stencilled in white or black.

Firecheck Fire Hose

Firecheck Fire Hose is non-percolating with a robust, all-synthetic jacket. It is designed for use by fire brigades and industry.

First Aid Kits

Our first aid kits are a collection of supplies and equipment for use in giving first aid and were purposefully put together. There is a wide variation in the contents to the requirements of the area where it may be used and variations in legislation or regulation in a given area.

Foam Making Equipment

The foam inductors are designed to feed foam concentrates at a set mixing rate into the hose line. Inductors are placed in the delivery line between the pump and the foam nozzle and can be used for medium- and also for heavy foam nozzles.

Forester Fire Hose

The Forester Fire Hose is a percolating hose with a robust, all-synthetic jacket. It is suitable for forest and field fires with the outer coating remaining wet during use. These hoses are rot proof, and need not be dried after use.

Fortex Fire Hose

The Fortex fire hose is an all-purpose Nitrile Rubber Fire Hose. It is a multi-purpose hose for many industries and can be used for liquid transfer of chemicals, hydrocarbons & gasoline and all agricultural and irrigation applications.

French Coupling

This symmetrical quick connection coupling is used to connect fire hoses, and is available with or without a locking ring.

Fume Cabinet Suppression System

The Fume Cabinet Suppression System is a complete pre-engineered system for Laboratory Fume Cabinets and other zones at risk from chemical combustion.

Geka Coupling

Geka fittings are a great alternative to Hozelock style hose connectors. A useful piece of fire equipment, Geka fittings also double up as a jubilee clip on the hose tails.

Gemini-12V-DC-Slider-7Ah-MCS Management Solutions

GEMINI 12V DC 7Ah (Residential)

The GEMINI 12V DC 7Ah domestic sliding gate system is a self contained unit, which comprises of a single 12 Volt direct current electrical motor that drives the rack pinion through a reduction gearbox. The base box is secured to the base plate, which in turn is cemented or bolted to a concrete base. The complete unit is enclosed with a weather resistant lid. This motor is available in two models.

GEMINI 12V DC Slider 12Ah (Residential / Small Complex)

The GEMINI 12V DC 12Ah domestic sliding gate system is a self contained unit, which comprises of a single 12 Volt direct current electrical motor that drives the rack pinion through a reduction gearbox. The base box is secured to the base plate, which in turn is cemented or bolted to a concrete base. The complete unit is enclosed with a weather resistant lid. This motor is available in two models.

Gemini-24V-DC-Slider-MCS Management Solutions

GEMINI 24V DC Slider (Complex)

The GEMINI 24V DC sliding gate system is a self contained unit, which comprises of a single 24 Volt direct current electrical motor that drives the rack pinion through a reduction gearbox. The base box is secured to the base plate, which in turn is cemented or bolted to a concrete base. The complete unit is enclosed with a weather resistant lid.

Green Direction Sign

The Green Direction sign indicates the direction to escape route in case of emergency. Green signs are meant to give information.

Heavy Duty Vehicle Brackets

Heavy duty vehicle brackets for safe and secure mounting and transportation of the following fire extinguishers: 2,5kg, 4,5kg and 9kg.

High flow – Split-case pump (SCP)

1 or 2 stage, low pressure centrifugal pump in monobloc design
Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics
Bronze/Stainless Steel impeller available

High flow – Split-case pump (Vertical Turbine)

With immersed axial or semi-axial, single or multistage hydraulics
As removable or permanent installation
With open shaft for bearing lubrication with the fluid or with shaft trim for separate bearing lubrication
Drive options: electric motor, diesel motor or steam turbine

High Pressure Economy Skid Unit

This high pressure Economy Skid Unit includes a 500-litre unit with a 10m delivery hose, a 3-way valve on suction and a 5m external suction hose assembly for a low volume application.

Hinged Door Safety Cabinet 4.5kg

This Hinged Door Safety Cabinet 4.5kg is standing 570mm high and 300mm wide, manufactured using only SABS approved polyester resin and materials.

HL120 Mobile Foam Unit

The innovatively designed HL120 Mobile Foam Unit is a fully self-contained mobile unit, which has been specifically developed for the rapid deployment of foam extinguishing agent to fires and chemical spills.

Home Emergency Fire Kit

The home emergency fire kit is a compact fire protection kit for home use and includes a 0.9m x0.9m fire blanket, a photoelectric battery operated smoke detector and a 0.6kg DCP disposable fire extinguisher.

Hose Reel Sign

The Hose Reel sign indicates the location of a hose reel in the event of a fire.

Instantaneous (Brass)

This non-symmetrical quick connection coupling with a male and female part connects to hoses. It is used only in delivery operations.

Instantaneous Adapter

Equipped with a male and female fitting, the instantaneous adapter is non symmetrical and helps firefighters to connect hoses quickly.

Intantaneous (Aluminium)

This non-symmetrical quick connection coupling with a male and female part connects to hoses. It is used only in delivery operations.

Key Boxes

Key Boxes are metal or plastic boxes for the safe storage of exit door keys, with a break glass function in case of a fire emergency.

Knapsack Complete

The Knapsack Complete has been designed for fighting low intensity fires or hot spots or for mopping up after fires have been extinguished.

Lift Pumps (Drainlift)

Sewage lift pumps
Suitable for residential and commercial buildings
Easy Installation
Suitable for permanent operation
Built in NRV
Reliable level measurement due to level sensor

Low Pressure Economy Skid Unit

This value offering Low Pressure Economy Skid Unit includes a 500-litre unit with a 10m delivery hose, a 3-way valve on suction and a 5m external suction hose assembly for a low volume application.

Machino Coupling

The Machino is a quick connect-and-disconnect coupling used on fire hoses.

Mamba Fire Hose

The Mamba Fire Hose is a non-percolating uncoated box hose with a robust polyester jacket, rot-free and resistant to weathering and aging. The synthetic fibers in the hose jacket does not degrade over time. The Mamba fire hose is light, very flexible and easy to handle.

Marine Cabinet – Type One

The Marine Cabinet – Type One are manufactured using only SABS approved polyester resin and materials.

Marine Cabinet – Type Three

The Marine Cabinet – Type Three are manufactured using only SABS approved polyester resin and materials.

Marine Cabinet – Type Two

The Marine Cabinet – Type Two are manufactured using only SABS approved polyester resin and materials.

Metal Vehicle Brackets

Metal vehicle brackets for safe and secure mounting and transportation of the following fire extinguishers: 1kg, 1,5kg, 2,5kg, 4,5kg and 9kg.

Miscellaneous AWG Products

Every AWG product is designed to provide years of service and exceed the stringent demands of the firefighting industry.

Mixing (Servio ACT)

Maximum energy efficiency with optimised mixing result
IE3 motors available
Optimised system performance through an increased penetration of biomass particles
Low space requirement due to compact design
Flow rate up to 4000m3/h
Percent by volume of biomass particles: 40 up to 70%
Layer thickness of biomass particles: 1.6 up to 5.5m

Nakajima Adapter

The Nakajima Adapter is a type of hermaphrodite connection system with two interlocking connecting lugs.

Nakajima Coupling

The Nakajima Coupling is an hermaphrodite connection system has two interlocking connecting lugs for fire hose connections.

NST Coupling

National Standard Thread, also known as National Hose (NH) thread, is one of the more common couplings used in fire equipment.

Oetiker Clamps

Oetiker clamps are placed over the end of hoses or tube extensions. When the ear is closed, it permanently deforms, causing the band to tighten around the fire hose.

Plastic Clip-In Vehicle Brackets

Plastic clip-in vehicle brackets for safe and secure mounting and transportation of the following fire extinguishers: 0,6kg, 1kg, 1,5kg and 2,5kg.

PolyZ Fire Hose

The PolyZ Fire Hose is a non-percolating hose with a robust, all-synthetic jacket, designed as a box hose with no need to dry after use and if necessary can be repaired easily. With a new generation material it is very light for handling.

Pressure Gauges

Most dry-chemical fire extinguishers have a built-in pressure gauge. If the gauge indicator is pointing to “recharge,” the pressure in the extinguisher may be too low to expel the contents.

Purple K Fire Extinguisher

Purple K Fire Extinguisher is the MOST EFFECTIVE DRY chemical in fighting CLASS B (flammable liquid) fires. The 9kg Purple K Fire Extinguisher with fire rating of 233B is SABS tested and approved in accordance with the SANS 1910 standard.

Red Arrow Right Sign

The Red Arrow Right sign is extremely useful for indicating direction or location in the event of a fire emergency.

Redlam Panic Bolt

The Redlam Panic Bolt is manufactured from cast aluminium, Redlam panic bolts are the economical solution to the problem of providing reliable security for internal emergency exits.

Safe & Loud Signalling Alarm

The Safe & Loud Signalling Alarm is an aerosol powered, hand held signalling alarm for instant emergency communication at the touch of a finger.

Sewage Pump (MTS)

Stationary
Wet installation only
Flow rate from 2m3/h up to 14m3/h
Internal Macerator
Thermal motor monitoring
10m lead out cable as standard
Ex – rated in accordance with ATEX as standard

Sliding Door Cabinets – Type One

The Sliding door cabinets – Type One are manufactured using only SABS approved polyester resin and materials.

Sliding Door Cabinets – Type Two

The Sliding door cabinets – Type Two are manufactured using only SABS approved polyester resin and materials.

Smoke Alarms

Photoelectric smoke alarms are designed to detect fires that smoulder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding.

Solid Separation (EMUport)

Compact sewage pumping station
Pumps do not come in contact with the solids in the wastewater
Two Dry-well installed submersible sewage pumps for alternating mode
Level measurement according to customers request

Stafix Electric Fences

MCS Management Solutions is a provider and installer of Stafix Electric Fencing products.

Stainless Steel Fire Hose Reels

MCS is a leading supplier of stainless steel fire hose reels for commercial, industrial and public buildings for response to a small developing fire. The hoses, hose reels and accessories MCS stocks, are designed for industrial applications.

Standard Hose Reel

This high quality SABS certified standard fire hose reel is supplied with a wall-mounted bracket, hose guide, durable nozzle and 30 meters hose: SANS 1086, EN694.

Standpipes

Standpipes are a type of rigid water piping which is built into multi-story buildings in a vertical position to which fire hoses can be connected, allowing manual application of water to the fire.

Storz Adapters

Storz adapters are used for connecting fire hydrants, Storz is a quarter turn adapter that is easy to connect with no particular male or female parts.

Storz Coupling

When connecting two fire hydrants with different hose ends, Storz couplings provide a quick and easy solution.

Swing Type Hose Reel

This high quality SABS certified swing type fire hose reel is supplied with a wall-mounted bracket, hose guide, durable nozzle. This high quality SABS certified fire hose reel is supplied with a wall-mounted bracket, hose guide, durable nozzle and 30 meters hose: SANS 1086, EN694.

Transfer (Axial Flow)

Submersible
Special coatings available to protect against corrosive & abbrasive liquids
Free ball passage: 85mm – 130mm
Angle of blades can be adjusted by hand
All filling fluids are environmentally safe
ATEX versions available

Treatment (MIXER)

Extremely low power consumption due to IE3 motor
Light weight
ATEX versions available
Self-cleaning propeller
Propeller in steel or PUR version
Blades can be replaced individually – selected models
2 – 3 blade propellers
Flexible installation
Special coatings available to protect against corrosive & abrasive liquids